The Products We Sell Are Technical!

• ArrestAir-Pro - External cowl for superior anti-draught performance
• 350mm (14") long, 102mm (4") dia plastic tube
• Use 107mm diameter core bit drill
• Internal inverted quad directional grille DiffuseAir. Stamped 'Important Do Not Block'.
• Stainless steel screws, plugs and installation instructions
• 31 cm² Free-area equivalent

• ArrestAir-Pro - External cowl for superior anti-draught performance
• 350mm (14") long, 152mm (6") dia plastic tube
• Use 152-162mm diameter core bit drill
• Internal inverted quad directional grille DiffuseAir. Stamped 'Important Do Not Block'.
• Stainless steel screws, plugs and installation instructions
• 75 cm² Free-area equivalent

• ArrestAir-Pro - External grille for superior anti-draught performance
• 350mm (14") long, 127mm (5") dia plastic tube
• Use 127mm diameter core bit drill
• Internal inverted quad directional grille DiffuseAir. Stamped 'Important Do Not Block'.
• Stainless steel screws, plugs and installation instructions
• 90 cm² Free-area equivalent

• ArrestAir-Pro - External grille for superior anti-draught performance
• 350mm (14") long, 152mm (6") dia plastic tube
• Use 152-162mm diameter core bit drill
• Internal inverted quad directional grille DiffuseAir. Stamped 'Important Do Not Block'.
• Stainless steel screws, plugs and installation instructions
• 100 cm² Free-area equivalent

• ArrestAir-Pro - External cowl for superior anti-draught performance
• 350mm (14”) long, 102mm (4”) diameter plastic tube
• Use 107mm diameter core bit drill
• Rubber seal gasket
• Internal inverted quad directional grille DiffuseAir. Stamped "Important do not block"
• Stainless steel screws,plugs and installation instructions
• 31 cm² Free-area equivalent

• ArrestAir-Pro - External cowl for superior anti-draught performance
• 350mm (14”) long, 152mm(6”) diameter plastic tube
• Use 152-162mm diameter core bit drill
• Rubber seal gasket
• Internal inverted quad directional grille DiffuseAir. Stamped "Important do not block"
• Stainless steel screws, plugs and installation instructions
• 75 cm² Free-area equivalent

All kits conform to the requirements of BS 5400 Part 2:2000 and have been independently tested by Advantica or BRE for equivalent free area.

Applications Include:
Gas / Oil - boiler venting, gas fire venting (including flueless) and solid fuel venting
Oil - Burning & Sold Fuel appliances with an output up to 45kW
Oil Burning Appliance - A permanent air entry opening with a total free area of at least 550mm2 /kW of appliance rated output
Solid Fuel Burning Open - A permanent air entry opening or openings with a total free area of at least 5,500mm2 or 50% of the appliance throat opening (whichever is the greater). (Note - if a boiler damper is fitted, the area should be measured with the damper closed).
Other Solid Fuel Appliance - A permanent air entry opening or openings with a total free area equal to at least the combined areas of the primary and secondary air inlets to the appliances.