fungicidal wash - for condensation control
Fungicidal Wash |
||
|---|---|---|
| Order Code: | Specifications: | |
 |
|
|
 |
|
|
 |
|
|
Labeling and packaging may be different at the time of order. All treatment areas stated are dependent on strength of mould, algae etc. growth.
Application and Usage of Fungicidal Washes
FS 500 - Spray affected surface, wipe clean with a cloth or sponge to remove all traces of mould, algae and mildew. Apply a second lighter spray to prevent re-growth.
FW 240 - Remove dirt, grease and any loose surface covering. Dilute this container with clean water, makes 5 litres of working solution. Apply liberally by brush, soft cloth or spray to infected surfaces. Allow 24 hours for treatment to be fully effective. Two applications are recommended for heavily infected surfaces.
FW 2500 - Dilute 1 part fungicidal wash to 4 parts clean water. Apply liberally by brush and let dry for 24 hours, then scrape or brush surfaces to remove all mould, lichen and algae. Re-treat with second application, let dry for 24 hours.
After treatment with all fungicidal washes, once dry wipe over with clean water on a cloth and let dry. The surface can then be painted.
Keep children & pets away from treated area until dry.
Do not use on polished surfaces, carpets or textiles, or any surfaces where food is prepared.
Dangerous to fish, cover all tanks or remove from area before application.
