eclipse heat recovery ventilator - for condensation control

Eclipse Heat Recovery Ventilator (HRV) - For Single Rooms
Order Code: Specifications:
Eclipse Heat Recovery Ventilator (HRV)

*Estimated

CSHRV-12V

  • Tested with outside air temperature at 7oC and inside temperature at 23oC
  • Minimum wall thickness 260mm
  • Maximum wall thickness 360mm
  • Average volume for air exchanged* 370m3/24hrs
  • Incoming air temperature 20oC
  • Heat exchange efficiency 80%
  • Noise factor on trickle 21 dBA
  • Noise factor on boost 45 dBA
  • Electrical consumption on trickle 9.3W
  • Electrical consumption on boost 46W
  • Diameter of fan blades 110mm
  • Diameter of core drill 152 to 162mm
  • Includes fixings & plugs

*Assuming an average of 80% trickle and 20% boost speed.

Applications:

The Eclipse is suitable for use in a wide variety of domestic commercial and light industrial environments.

  • Kitchens
  • Bathrooms
  • Utility Rooms
  • Living Rooms
  • Bedrooms
  • Dining Rooms
  • Lavatories & Washrooms
  • Offices
Order Code: Specifications:
Wall Extension Kit

CS3000ET

  • Consists of a 152mm (6") diameter and 128mm (5") diameter rigid PVC tubes which are required to separate the two airflows
  • Extends the unit to a maximum of 1M

How Heat Recovery Works

Heat recovery ventilators contain two fans. One extracts the air from the room and the other replaces it with fresh air. The two air flows pass through alternate layers of a highly efficient heat exchanger. The heat in the extracted air is passed to the incoming cooler air, but air streams do not mix within the ventilator.

These ventilators are designed to run continuously at low speed providing background ventilation. When the humidity exceeds a pre-set level the ventilator switches to boost, rapidly removing the damp stale air.

Valid XHTML 1.0 Transitional Valid CSS!