Customer Advice Regarding On Line Orders
The Condensation Shop Ltd take credit card fraud seriously and to help protect our customers we currently do not take online payments.
If you wish to continue with your order, please call our dedicated Sales Team on 01799 528528 during our office hours and we will help advise you on your purchase.
- We will send over a secure payment link for you to enter your own card details to complete the purchase of your order.
- Then to make things even more secure your cardholder provider might request a 2nd verification which will involve putting in 4 to 6 numbers so they know its really You! Having then done this your approved payment will be seen on the screen in our sales office upon which your order will be despatched.
By creating an online account with the Condensation Shop Ltd. you agree to our Terms & Conditions and Privacy Policy
We would like to thank you for your interest in our products and look forward to speaking to you soon.
ArrestAir®-Pro Plus
for Background Ventilation
Used ONLY for additional ventilation in new build or refurbishment projects where it is not possible to provide sufficient ventilation via window or door trickle vents.
ArrestAir®-Pro Plus
ArrestAir-Pro Plus Core DiffuseAir for Background Ventilation
Order Code: AP-BAC 37CT
Specification
- ArrestAir-Pro - External grille for superior anti-draught performance.
- 350mm (14") long, 102mm (4") dia plastic tube
- Use 107mm diameter core bit drill
- Internal closeable inverted quad directional grille DiffuseAir with fly mesh.
- Stainless steel screws, plugs and installation instructions.
- 3700mm2 (37cm2) Free Area Equivalent
Please see above for Core Bit Drill hire details
Features
- Saves energy with passive airflow.
- Controls wind blast and prevents draughts irrespective of wind direction.
- Provides over 5000mm2 equivalent area when used with most duct sizes.
- Internal grille has manually controllable internal closing plate plus fly mesh.
- Safely prevents gas spillage caused by side winds.
- Can be used in new build and retro-fitted in refurbishment projects etc.
- Conforms to BS EN 13141-1:2004
- Conforms to Building Regulations Part F October 2010
Technical Details
Using a combination of the tried and tested range of ArrestAir-Pro Plus DiffuseAir products, this background ventilation version has been skilfully modified to ensure the internal grille has a closing plate and incorporates a fly mesh.
Having been fully tested the Building Research Establishment has determined the equivalent areas of ArrestAir-Pro Plus through wall assemblies opposite with circular ducting up to 150mm and rectangular ducting, up to a nominal size of 225mm x 150mm, to enable compliance with Building Regulations minimum requirements.
Although not shown the ArrestAir-Pro, being the external grille, and the DiffuseAir internal grille together can be used for upgrading existing wall vents to save energy and prevent draughts. For optimum performance ArrestAir-Pro and DiffuseAir should be fixed centrally over any wall duct.
The Building Regulations Require:
Table 1.7 From Part F Building Regulations June 2022 Minimum Equivalent Area of Background Ventilators For Natural Ventilation | ||
---|---|---|
Room | Minimum equivalent area of background ventilators for dwellings with multiple floors | Minimum equivalent area of background ventilators for single-storey dwellings |
Habitable Rooms | 8,000mm2 | 10,000mm2 |
Kitchen | 8,000mm2 | 10,000mm2 |
Utility Room | No Minimum | No Minimum |
Bathroom | 4,000mm2 | 4,000mm2 |
Background ventilators should be sited to avoid draught, i.e. not less than 1.7m above floor level.
Note
This background version of ArrestAir-Pro Plus DiffuseAir cannot be used as a method of providing ventilation to any gas, oil, or solid fuel appliance. See our ArrestAir-Pro range for air combustion venting.
Core Bit Hire
To help with a Core Wall Kit installation you can hire* a Core Drill Bit for 10 days (inclusive of weekend days and bank holidays) at a nominal charge. This offer only applies at the time of purchase of any Core Wall Kit and includes the Passyfier®, ArrestAir Pro and ArrestAir-Pro Plus range of products.
* Subject to a charge, availability & existing wall construction.
Notes
Get Help or Advice!
The Condensation Shop offers a wide range of products to suit numerous condensation and damp related issues.
If you would like assistance in selecting the correct product for your specific problem please call our helpful Sales Team on 01799 528528, during normal opening hours.